Hi
In this small tutorial, I am going to show several easy ways to make a multiboot
rescue USB flash disk. hope this tutor will be helpful for Boot-Land readers.
(1) LiveXP USB flash Disk
Note that there is an excellent description Of this object in the link below by "womb",
Anyway, here I try to explain the process easily and quickly.
http://www.boot-land.net/forums/index.php?...c=4900&st=0
1_ Download LiveXP Files from the link below:
http://winbuilder.net/download.php?list.5
2_ Run Winbuilder you have just downloaded and create your favorite LiveXP ISO. (Check it
to be sure it works OK.)
3_ Connect USB flash drive to computer and wait until your system finds that.
4_ Run "PeToUSB.exe" (you can extract that from win builder scripts) and in the coming window select
options below (see fig_1 from attachment).
Enable Disk Format
Quick Format
Enable LBA
and also type the address of "Your Winbuilder directory\Target\LiveXP" as the source path.
5_ Click on the "Start" button.
6_ The program will make all necessary works and then you will have a USB flash drive that will
run live XP.
(2) Active@ Boot Disk 4.05" USB Flash Disk
1_ Download Active@ Boot Disk 4.0 (Windows version) and Install it.
2_ Connect USB flash drive to Computer.
3_ Run Active@ Boot Disk Creator.
4_ Click on "Boot Disk Win Edition", then click on "Win USB Flash Boot Disk".
5_ The program will show a USB flash drive, click on the "Create" button. after a while bootable
A USB drive will be created.
This is all.
Now you have a Bootable USB Flash drive with Some useful utilities for rescue purposes.
Note:
-------
(3) BartPE USB flash Disk Using PEBuilder 3.1.10a
1_ Download PEBuilder 3.1.10a, place your favorite plugins on it.
2_ Run pebuilder.exe and in the coming window, In Media "Output section" select "None".(see
fig_2 from attachment).
3_ Click on the "Build" button. After a few minutes, needed files will be made inside your PEBuilder
in "BartPE folder".
4_ Run "PeToUSB.exe" (you can extract that from win builder scripts) and in the coming window select
options below (see fig_3 from attachment).
Enable Disk Format
Quick Format
Enable LBA
and also type the address of "Your PEBuilder directory\BartPE" as the source path.
5_ Click on the "Start" button.
6_ The program will make all necessary works and then you will have a USB flash drive that will
run BartPE.
There are other ways to make a Bootable USB flash drive, I will try to talk about them later
and hope other friends will help to get more information and ways.
have nice times